How to draught proof your house

1. Fitting weatherstripping tape can make home windows as well as outside doors significantly less draughty. Weatherstripping (normally self-adhesive foam tape or brush or wiper-style strips) is used to fill the gap between the frame and the moving parts of a window or door, but it’s important to get it right. If the strip’s too thick, it may stop the window or door closing properly, and if it’s too thin, there will still be a gap. Original sash windows are notoriously draughty, so you may want to get a pro to draughtproof (and refurbish) them. Weatherstripping can even be used around the opening to your home’s loft hatch to keep out draughts from above – to insulate the hatch door/cover, fix a thick piece of polystyrene or rigid insulation material to the back.

2. Minimise draughts at the end of an exterior entrance with a brush-style strip : simply cut it to fit and screw this in place, but don’t match it too low as well as it will drag on the ground. Exterior doors also need to be fitted with keyhole in addition to letterbox covers/flaps to stop cold atmosphere coming in. For extra efficiency at this time of year, fit a curtain rod above an external door and use a heavy or thermal drape on it.

3. Internal doors should be draughtproofed when they lead to a room which isn’t heated. Keep the entrance closed so the frosty air stays within the unheated room, and cover any kind of gap at the bottom from the door with a fabric ‘sausage’ draught excluder.

4. While striped and varnished, waxed or perhaps painted original floor are lovely, they may be draughty. This may not be a problem in the because heat should rise from the bedrooms below, but downstairs there’ll be a void between the floormats and the ground beneath (which is important for air flow), resulting in cold atmosphere coming through the holes between the boards, specially in winter. Filling the particular gaps helps and there are specialist products with this, but the boards shift slightly every time you tread on them, so can be whether the product continuously move with the planks or be dislodged.

5. Chimneys can be very draughty, so if you provide an unused fireplace, get a roofer to cap the chimney. With regard to fireplaces you only utilize sometimes, a masonry balloon is a good idea. This really is inflated inside the masonry to help prevent draughts coming down the chimney in addition to into the room, however make sure you remove the device before using the hearth.